Roller Blinds, Wooden Venetian Blinds, Roman & Velux Blinds - Blinds-4UK

Technical information for collection:

Blinds4UK  Venetian Blinds

Features/Benefits

• Fantastic value
• Sleek and stylish
• Ideal for filtering or cutting out light
• Blind can be raised, lowered tilted and turned    
• Perfect throughout  the home
• Ideal for conservatories, kitchens, bathrooms and awkward windows
• Comprehensive selection of colours and choice of finishes
• Choice of 15mm, 25mm, 35mm & 50mm slat widths
• Control preferences
• Easy to use
• Easy to clean

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm.
Please be aware of the following when measuring:

The order also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places  

Allowances

Please refer to our how to measure venetians blinds page for allowances made to this product.

Operation

• Each blind can be tilted, raised and lowered by separate controls.
• Tilting of 15mm, 25mm and 35mm blinds is by wand and 50mm is by a cord loop. Please specify whether this control is required on the left or right.
• To raise and lower the blind cords are used. Please specify whether the cords are needed on the left, right or separate sides.

Additional Information

• 15mm and 25mm blinds are supplied with co-ordinating ladder, cord, headrails and bottom rails.
• 35mm and 50mm blinds are supplied with white ladder, cord, headrails and bottom rails
• 15mm & 25mm and 35mm blinds are supplied with a headrail that is 27mm wide x 19mm height.
• 50mm blinds are supplied with a headrail that is 38mm wide x 28mm height
• All blinds are supplied with standard swivel brackets or universal extension brackets.

Important Note:

• Before ordering you are advised to read the ‘how to measure venetians blinds’  page.
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Wooden Venetian Blinds – B4UK Classic

Features/Benefits

• Excellent value   
• Stylish and practical
• Ideal for filtering or cutting out light
• Blind can be raised, lowered tilted and turned   
• Perfect for blinds that sit inside a window recess (edges not stained)
• 7 different shades available in 25mm, 35mm, & 50mm slat widths
• Tilt control cords on the left and raise/lower control cords on the right
• Easy to use
• Easy to clean

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm
Please be aware of the following when measuring:

The order also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure wooden blinds page for allowances made to this product.

Stacking

Due to the thickness of the wood slat it is important that you are aware of the stack size for the blinds. The following details are for guidance only.

Slat Width

Choose from a slat widths of either 25mm, 35mm or 50mm (See individual slats for availability)

Operation

• Each blind can be tilted, raised and lowered by separate controls.
• Cords are used to raise and lower the blind
• All control cords and wooden acorns are colour co-ordinated with the wood slats.
• Each blind is supplied with split  controls only  with tilt cords on the left and raise/lower cords on the right.

Options

• Blinds only available with ladder cord.

Fittings

A valance colour coordinated to  the wood slats is also included. Blinds measured Recess or Exact will be supplied with a straight valance only 

Note:

A valance that covers the end of the rail is not available with this collection..

Additional Information

• 25mm and 35mm blinds are supplied with a headrail that is 40mm wide x 40mm height.
• 50mm blinds are supplied with a headrail that is 51mm wide x 40mm height.
• All blinds supplied with end fix brackets. Larger blinds will be supplied with U shaped centre support brackets which can either be face fixed or top fixed.

Please note Blinds over 200cm wide are only available on 50mm Slat

Important Note:

• Before ordering you are advised to read the ‘how to measure wooden  blinds’ page
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Wooden Venetian Blinds – B4UK Traditions

Features/Benefits

• Fantastic value
• Every blind is stained for that perfect finish
• Stylish and practical
• Ideal for filtering or cutting out light
• Blind can be raised, lowered tilted and turned   
• 10 different shades available in 25mm, 35mm, & 50mm slat widths
• Unique easy lift system built into blinds over 82cm
• Valance returns to cover end of headrail supplied at no extra cost (for blinds specified Exact)
• Ladder Tape options available
• Choice of control preferences
• Easy to use
• Easy to clean

Please be aware of the following when measuring:

The order also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure wooden blinds page for allowances made to this product.

Stacking

Due to the thickness of the wood slat it is important that you are aware of the stack size for the blinds. The following details are for guidance only and should be increased by 10% for blinds supplied with tape.

Slat Width

Choose from a slat width of either 25mm, 35mm or 50mm (See individual slats for availability)

Operation

• Each blind can be tilted, raised and lowered by separate controls.
• Cords are used to raise and lower the blind. Please specify whether the cords are needed on the left or right, or on separate sides.
• All control cords and wooden acorns are colour co-ordinated with the wood slats.
• If split controls are required the tilt cords must be on the left with the cord lock on the right

Options

• Blinds can be ordered with either a ladder cord or tape.
• 25mm & 35mm blinds are supplied with a ladder tape width of 18mm. 50mm blinds are supplied with a tape width of 25mm. The colour reference chosen should be stated on your order.

Fittings

A valance colour coordinated to the wood slats is also included. Blinds measured recess will be supplied with a straight valance, blinds measured exact will be supplied with a valance that covers the end of the rail.

Additional Information

• 25mm and 35mm blinds are supplied with a headrail that is 40mm wide x 40mm height.
• 50mm blinds are supplied with a white headrail that is 51mm wide x 40mm height..
• All blinds supplied with end fix brackets. Larger blinds will be supplied with U shaped centre support brackets which can either be face fixed or top fixed.

Please note Blinds over 200cm wide are only available on 50mm Slat

Important Note:

• Before ordering you are advised to read the ‘how to measure wooden  blinds’ page
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Wooden Venetian Blinds - Inspiration

Features/Benefits

• Fantastic value
• Precision crafted and stained finished to exacting standards
• 16 prime colours  available in 25mm & 50mm slat widths
• Every blind is stained for that perfect finish
• Stylish and practical
• Ideal for filtering or cutting out light
• Blind can be raised, lowered tilted and turned   
• Valance returns to cover end of headrail supplied at no extra cost (for blinds specified Exact)
• Ladder Tape options available
• Choice of control preferences
• Mixed colour Wood Blinds available on request
• Extra long drop up to 380cm available on request
• Easy to use
• Easy to clean

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm
Please be aware of the following when measuring:

The order also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure wooden blinds page for allowances made to this product.

Stacking

Due to the thickness of the wood slat it is important that you are aware of the stack size for the blinds. The following details are for guidance only and should be increased by 10% for blinds supplied with tape.

Slat Width

Choose from a slat width of either 25mm or 50mm

Operation

• Each blind can be tilted, raised and lowered by separate controls.
• Cords are used to raise and lower the blind. Please specify whether the cords are needed on the left or right, or on separate sides.
• All control cords and wooden acorns are colour co-ordinated with the wood slats and supplied a standard.
• Brass & Chrome Toggles available

Options

• Blinds can be ordered with either ladder cord or tape.
• 25mm & 50mm blinds are supplied with a ladder tape width of 25mm as standard.
• 38mm ladder tape is available for 50mm blinds only  on request. The colour reference chosen should be stated on your order.

Fittings

A valance colour coordinated to the wood slats is also included. Blinds measured recess will be supplied with a straight valance, blinds measured exact will be supplied with a valance that covers the end of the rail.

Additional Information

• 25mm and 50mm blinds are supplied with a headrail that is 51mm wide x 57mm height.
• Mixed colour Wood Blinds are  available
• All blinds supplied with end fix brackets as standard. Larger blinds will be supplied with U shaped centre support brackets which can either be face fixed or top fixed
• Swivel brackets available as alternative on request

Important Note:

• Before ordering you are advised to read the ‘how to measure wooden  blinds’ page
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Wooden Venetian Blinds - Impressions

Features/Benefits

• Excellent value
• Wood impression blind giving you the look of wood with the added benefits
• Hardwearing, durable and resistant to cracking, fading or warping.
• Flame retardant, easy to clean & maintain
• Ideal for moist environments such as bathrooms & kitchens
• Coordinated Valance
• Valance returns to cover end of headrail supplied at no extra cost (for blinds specified Exact)
• Ladder cord or Tape options
• Steel headrail system with robust ladder cords and quality components
• Choice of control preferences
• Easy to use
• Easy to clean

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm
Please be aware of the following when measuring:

The order also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure wooden blinds page for allowances made to this product.

Stacking

Due to the thickness of the wood slat it is important that you are aware of the stack size for the blinds. The following details are for guidance only and should be increased by 10% for blinds supplied with tape.

Slat Width

50mm slat width only available

Operation

• Each blind can be tilted, raised and lowered by separate controls.
• Cords are used to raise and lower the blind. Please specify whether the cords are needed on the left or right, or on separate sides.
• All control cords and wooden acorns are colour co-ordinated with the wood slats and supplied a standard.
• Brass & Chrome Toggles available

Options

• Blinds can be ordered with either ladder cord or tape.
• 50mm blinds are supplied with a ladder tape width of 25mm as standard.
• 38mm ladder tape is available for 50mm blinds only  on request. The colour reference chosen should be stated on your order.

Fittings

A valance colour coordinated to the slats is also included. Blinds measured recess will be supplied with a straight valance, blinds measured exact will be supplied with a valance that covers the end of the rail.

Additional Information

• 50mm blinds are supplied with a headrail that is 51mm wide x 57mm height.
• Mixed colour slat blinds are  available
• All blinds supplied with end fix brackets as standard. Larger blinds will be supplied with U shaped centre support brackets which can either be face fixed or top fixed
• Swivel brackets available as alternative on request

Important Note:

• Before ordering you are advised to read the ‘how to measure wooden  blinds’ page
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Roller Blinds – B4UK Splendor

Features/Benefits

• Affordable
• Wide selection of Light diffusing, blackout, textured, flame retardant and patterned fabrics
• Blinds can be raised and lowered to control light filtering into the room
• Choice of scallop shape options, poles, braid and pulls
• Sidewinder control preferences left or right
• Spring control
• Easy to measure and install
• Fabrics that coordinate with vertical blinds

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm

The order form also needs to specify which measurement has been taken:

The measurement you are making is the BRACKET to BRACKET measurement. Please refer to our How to measure roller blinds guide for more information.

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure roller blinds page for allowances made to this product.

Shapes

All blinds are supplied with a Straight edge finish as standard unless specified.

A square bottom bar is supplied as standard with all Roller blinds unless listed below.

Important Note:

Roller blinds/Blackout blinds supplied with round bottom bar as follows:

Dazzling, Mushroom, Piece, Sisal, Corn, Tan, Gooseberry, Aqua Marine, Denim, Nickel

Braid

If ordering braid the trim design & suitable colour match will be used by the factory.

Operation

• Blinds are either available with a sidewinder chain control or spring mechanism. If ordering a sidewinder please specify whether you would like the control on the left or right.
• Spring mechanisms are available on blinds up to 2m wide and are made with a 25mm barrel
• Sidewinder mechanisms up to 2m wide are made with a 25mm barrel
• Sidewinder mechanisms up to 2.4m wide are made with a 36mm barrel
• Sidewinder mechanisms up to 3m wide are made with a 42mm barrel

Brackets

Face fix guide

• Spring & Sidewinder mechanisms up to 2m wide – Metal brackets protrude 50mm x 40mm height
• Sidewinder mechanisms up to 2.4m wide – Metal brackets protrude 67mm x 40mm height
• Sidewinder mechanisms from 2.4m to 3m wide – Metal brackets protrude 78mm x 40mm height

Top fix guide

• Spring mechanisms up to 2m wide – Plastic brackets protrude 50mm x 80mm height
• Sidewinder mechanisms up to 2m wide – Metal brackets protrude 50mm x 63mm height
• Sidewinder mechanisms over 2m wide – Metal brackets protrude 50mm x 96mm height

Note:

Due to the weight of some fabrics larger blinds will be made on bigger barrels

Additional Information

• Brackets are available in white
• Whenever possible we will avoid joining a fabric. The technical information displayed under each individual  roller blind swatch will provide parameters to which blinds are made without  joins. .Measurements falling outside these parameters will require a horizontal join.
• Blackout fabric cannot be joined

Important Note:

• Before ordering you are advised to read the ‘how to measure roller blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Roller Blinds – Dim out shades; Luminations; Sheer Brilliance; Suedes Provenance; Voiles of Elegance

Features/Benefits

• Affordable
• Wide selection of Light diffusing, blackout, textured, flame retardant and patterned fabrics
• Blinds can be raised and lowered to control light filtering into the room
• Choice of scallop shape options, poles, braid and pulls
• Sidewinder control preferences left or right
• Choice of pull chain;  metal brass, metal chrome, and white plastic 
• Spring control
• Easy to measure and install
• Fabrics that coordinate with vertical blinds

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm

The order form also needs to specify which measurement has been taken:

The measurement you are making is the BRACKET to BRACKET measurement. Please refer to our How to measure roller blinds guide for more information.

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure roller blinds page for allowances made to this product.

Shapes

All blinds are supplied with a Straight edge finish as standard unless specified.

A square bottom bar is supplied as standard with all Roller blinds unless listed below.

Important Note:

Roller blinds/Blackout blinds supplied with round bottom bar as follows:

Dazzling, Mushroom, Piece, Sisal, Corn, Tan, Gooseberry, Aqua Marine, Denim, Nickel

Braid

If ordering braid the trim design & suitable colour match will be used by the factory.

Operation

• Blinds are either available with a sidewinder chain control or spring mechanism. If ordering a sidewinder please specify whether you would like the control on the left or right.
• Spring mechanisms are available on blinds up to 2m wide and are made with a 32mm barrel
• Sidewinder barrels are available up to 2m wide are on 32mm barrel, Blinds from 2m to 3.0m are made with a 45mm heavy duty barrel

Brackets

Face fix guide

• Spring mechanisms up to 2m wide – Plastic brackets protrude 80mm x 50mm height
• Sidewinder mechanisms up to 2m wide – Metal brackets protrude 63mm x 50mm height
• Sidewinder mechanisms over 2m wide – Metal brackets protrude 96mm x 50mm height

Top fix guide

• Spring mechanisms up to 2m wide – Plastic brackets protrude 50mm x 80mm height
• Sidewinder mechanisms up to 2m wide – Metal brackets protrude 50mm x 63mm height
• Sidewinder mechanisms over 2m wide – Metal brackets protrude 50mm x 96mm height

Note:

Due to the weight of some fabrics larger blinds will be made on bigger barrels

Additional Information

• Brackets are available in white
• Whenever possible we will avoid joining a fabric. The technical information displayed under each individual  roller blind swatch will provide parameters to which blinds are made without  joins. .Measurements falling outside these parameters will require a horizontal join.
• Blackout fabric cannot be joined

Important Note:

• Before ordering you are advised to read the ‘how to measure roller blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Blackout Blinds – B4UK Splendor

Features/Benefits

• Affordable
• Wide selection of Light diffusing, blackout, textured, flame retardant and patterned fabrics
• Blinds can be raised and lowered to control light filtering into the room
• Choice of scallop shape options, poles, braid and pulls
• Sidewinder control preferences left or right
• Spring control
• Easy to measure and install
• Fabrics that coordinate with vertical blinds

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm

The order form also needs to specify which measurement has been taken:

The measurement you are making is the BRACKET to BRACKET measurement. Please refer to our How to measure roller blinds guide for more information.

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure roller blinds page for allowances made to this product.

Shapes

All blinds are supplied with a Straight edge finish as standard unless specified.

A square bottom bar is supplied as standard with all Roller blinds unless listed below.

Important Note:

Roller blinds/Blackout blinds supplied with round bottom bar as follows:

Dazzling, Mushroom, Piece, Sisal, Corn, Tan, Gooseberry, Aqua Marine, Denim, Nickel

Braid

If ordering braid the trim design & suitable colour match will be used by the factory.

Operation

• Blinds are either available with a sidewinder chain control or spring mechanism. If ordering a sidewinder please specify whether you would like the control on the left or right.
• Spring mechanisms are available on blinds up to 2m wide and are made with a 25mm barrel
• Sidewinder mechanisms up to 2m wide are made with a 25mm barrel
• Sidewinder mechanisms up to 2.4m wide are made with a 36mm barrel
• Sidewinder mechanisms up to 3m wide are made with a 42mm barrel

Brackets

Face fix guide

• Spring & Sidewinder mechanisms up to 2m wide – Metal brackets protrude 50mm x 40mm height
• Sidewinder mechanisms up to 2.4m wide – Metal brackets protrude 67mm x 40mm height
• Sidewinder mechanisms from 2.4m to 3m wide – Metal brackets protrude 78mm x 40mm height

Top fix guide

• Spring mechanisms up to 2m wide – Plastic brackets protrude 50mm x 80mm height
• Sidewinder mechanisms up to 2m wide – Metal brackets protrude 50mm x 63mm height
• Sidewinder mechanisms over 2m wide – Metal brackets protrude 50mm x 96mm height

Note:

Due to the weight of some fabrics larger blinds will be made on bigger barrels

Additional Information

• Brackets are available in white
• Whenever possible we will avoid joining a fabric. The technical information displayed under each individual  roller blind swatch will provide parameters to which blinds are made without  joins. .Measurements falling outside these parameters will require a horizontal join.
• Blackout fabric cannot be joined

Important Note:

• Before ordering you are advised to read the ‘how to measure roller blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Blackout Blinds – Reminiscent

Features/Benefits

• Affordable
• Wide selection of Light diffusing, blackout, textured, flame retardant and patterned fabrics
• Blinds can be raised and lowered to control light filtering into the room
• Choice of scallop shape options, poles, braid and pulls
• Sidewinder control preferences left or right
• Choice of pull chain;  metal brass, metal chrome, and white plastic 
• Spring control
• Easy to measure and install
• Fabrics that coordinate with vertical blinds

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm

The order form also needs to specify which measurement has been taken:

The measurement you are making is the BRACKET to BRACKET measurement. Please refer to our How to measure roller blinds guide for more information.

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure roller blinds page for allowances made to this product.

Shapes

All blinds are supplied with a Straight edge finish as standard unless specified.

A square bottom bar is supplied as standard with all Roller blinds unless listed below.

Important Note:

Roller blinds/Blackout blinds supplied with round bottom bar as follows:

Dazzling, Mushroom, Piece, Sisal, Corn, Tan, Gooseberry, Aqua Marine, Denim, Nickel

Braid

If ordering braid the trim design & suitable colour match will be used by the factory.

Operation

• Blinds are either available with a sidewinder chain control or spring mechanism. If ordering a sidewinder please specify whether you would like the control on the left or right.
• Spring mechanisms are available on blinds up to 2m wide and are made with a 32mm barrel
• Sidewinder barrels are available up to 2m wide are on 32mm barrel, Blinds from 2m to 3.0m are made with a 45mm heavy duty barrel

Brackets

Face fix guide

• Spring mechanisms up to 2m wide – Plastic brackets protrude 80mm x 50mm height
• Sidewinder mechanisms up to 2m wide – Metal brackets protrude 63mm x 50mm height
• Sidewinder mechanisms over 2m wide – Metal brackets protrude 96mm x 50mm height

Top fix guide

• Spring mechanisms up to 2m wide – Plastic brackets protrude 50mm x 80mm height
• Sidewinder mechanisms up to 2m wide – Metal brackets protrude 50mm x 63mm height
• Sidewinder mechanisms over 2m wide – Metal brackets protrude 50mm x 96mm height

Note:

Due to the weight of some fabrics larger blinds will be made on bigger barrels

Additional Information

• Brackets are available in white
• Whenever possible we will avoid joining a fabric. The technical information displayed under each individual  roller blind swatch will provide parameters to which blinds are made without  joins. .Measurements falling outside these parameters will require a horizontal join.
• Blackout fabric cannot be joined

Important Note:

• Before ordering you are advised to read the ‘how to measure roller blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Roman Blinds – B4UK Winchmore

Features/Benefits

• Affordable
• Easy to measure and install
• Choice of control options, cleat & cord or sidewinder
• Choice of sidewinder chain; antique, chrome or  white plastic (supplied as standard)
• Fully lined roman blinds
• Blackout lining offered at no extra cost (specific fabrics only)
• Fabrics in a wide selection of colours, textures and patterns
• Dry cleanable fabrics (selected fabrics only)

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm.
Please be aware of the following when measuring:

These restrictions are imposed as a limit to the effective operation of the blind.
The order form also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure roman blinds page for allowances made to this product.

Operation

• Standard blinds are raised and lowered using a cord that can be tied around a cleat
• Deluxe blinds operate via a sidewinder mechanism with a white plastic chain supplied as standard
• Left or right control either cleat & cord or sidewinder chain
• Either face fix, top fix or universal extension brackets are available.

Additional Information

• All Roman blinds are fully lined
• Blackout lining available on specific fabrics (sidewinder control only)  
• All of the Roman blinds have a With Care Instruction label.
• Standard headrail 26mm wide x 25mm deep. Deluxe headrail 40mm wide x 40mm deep.
• Selected Roman blinds can be dry cleaned. Please ensure all fibre rods and cords are removed beforehand.

Important Note:

• Before ordering you are advised to read the ‘how to measure roman blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Roman Blinds – Romasuede

Features/Benefits

• Superb Value
• Easy to measure and install
• Fully lined roman blinds
• Blackout lining offered as optional extra
• Locking sidewinder control with left or right preference
• Chain available in White Plastic, Chrome or Brass
• Wide selection of faux suede colours

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm.

Please be aware of the following when measuring:

These restrictions are imposed as a limit to the effective operation of the blind.
The order form also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure roman blinds page for allowances made to this product.

Operation

• Sidewinder Chain control with left or right preference
• Universal  face fix/ top fix bracket supplied

Additional Information

• All Roman blinds are fully lined
• Blackout lining available as optional extra
• Blinds are made with a fabric join on measurements over 130cm 
• Aluminium headrail 34mm wide x 40mm height.
• Roman blinds can be dry cleaned. Please ensure all fibre rods and cords are removed beforehand

Important Note:

• Before ordering you are advised to read the ‘how to measure roman blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Vertical Blinds – B4UK Splendor

Features/Benefits

• Affordable
• Wide selection of Light diffusing, blackout, textured, flame retardant and patterned fabrics
• Offer superb control over how much light is filtered in to the room
• Perfect throughout the home
• Ideal for conservatories and awkward windows
• Practical PVC fabrics offered ideal for moist environments
• Fabrics that coordinate with roller blinds
• Easy to install
• Easy to clean

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm
Please be aware of the following when measuring:

The order also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure vertical blinds page for allowances made to this product.

Operation

• Vertical blinds are controlled using a cord operating control to draw the louvres
• White beaded plastic chain is used to rotate the louvres and for stabilizing.
• The blind can be made to either draw to the left, right or the bunch of louvres can be split to both sides.
• Controls can be specified either on the left or right

Headrails

• Headrails are available in white.
• All visible components are colour matched to the headrail.
• Standard headrail: 30mm wide x 27mm deep

Fittings

• Blinds are supplied with either face fix,top fix or universal extension brackets.
• Please note top fix brackets are supplied with Recess size blinds and face fix brackets for Exact size blinds.

Please contact us should you require top fix for Exact size and Face Fix for Recess size measurements.

Additional Information

We also supply replacement louvres available in 89mm & 127mm slat widths.

Important Note:

• Before ordering you are advised to read the ‘how to measure vertical blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Vertical Blinds – Dim out shades; Luminations; Reminiscen, Sheer Brilliance; Suedes Provenance; Voiles of Elegance

Features/Benefits

• Affordable
• Wide selection of Light diffusing, blackout, textured, flame retardant and patterned fabrics
• Offer superb control over how much light is filtered in to the room
• Louvers can stack to the left, right, or split, providing a clear outside view 
• Perfect throughout the home
• Ideal for conservatories and awkward windows
• Practical PVC fabrics offered ideal for moist environments
• Fabrics that coordinate with roller blinds
• Easy to install
• Easy to clean

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm

Please be aware of the following when measuring:

The order also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure vertical blinds page for allowances made to this product.

Operation

• Vertical blinds are controlled using a nickel operating chain to draw the louvres
• Nickel chain is used to rotate the louvres and for  stabilizing.White plastic chain also available on request.
• The blind can be made to either draw to the left, right or the bunch of louvres can be split to both sides.
• Controls can be specified either on the left or right
• Wand control available on request.

Headrails

• Headrails are available in white.
• Standard headrail: 44mm wide x 26mm deep
• Headrails are also available in silver and brown on request and supplied with colour coordinated pull cords

Fittings

• Blinds are supplied with either face fix,top fix or universal extension brackets.Shallow fix brackets also available on request.
• Please note top fix brackets are supplied with Recess size blinds and face fix brackets for Exact size blinds.

Please contact us should you require top fix for Exact size and Face Fix for Recess size measurements.

Additional Information

We also supply replacement louvres available in 89mm & 127mm slat widths.

Important Note:

• Before ordering you are advised to read the ‘how to measure vertical blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Blinds4UK Woodweve Blinds

Features/Benefits

• Superb Value
• Unique and stylish window covering 
• Woodweave blinds gently diffuse light creating ambience
• Roman style operation
• Matching valance
• Taped edges at no extra cost
• Locking cord control with left or right preference
• Easy to install

Measuring

The width and drop for each blind must be clearly specified, to the nearest 0.1cm.

Please be aware of the following when measuring:

Information

These restrictions are imposed as a limit to the effective operation of the blind.

The order form also needs to specify which measurement has been taken:

Exact

This measurement is the exact area you would like the blind to cover

Recess

This measurement should be calculated by measuring the recess width from wall to wall in 3 places and the drop from the top of the recess to the window sill in three places

Allowances

Please refer to our how to measure woodweave  blinds page for allowances made to this product.

Operation

• Locking cord control with left or right preference
• Universal  face fix/ top fix bracket supplied

Additional Information

A wide range of natural, renewable materials are used to create our Woodweave blinds, including jute, bamboo and wood. Woodweave blinds may display natural shade variation, as a reflection of the environment in which they grew.

Important Note:

• Before ordering you are advised to read the ‘how to measure woodweave  blinds’ page.. 
• We work to a tolerance level of 4mm on Made to measure blinds

Technical information for collection:

Velux Window Blinds

Features/Benefits

• Superb Value
• Genuine Velux window blinds
• Unique and stylish loft window blind covering 
• Choice of Blackout, Roller, Venetian, Pleated and remote control blinds.
• Easy to install

Locate your data plate;

In order to match the correct blind for your window, you need to provide us with information from the window's data plate.

All VELUX roof windows have a data plate stating exact information about the window.

For windows such as the one illustrated below, the data plate is located in the right corner of the top sash behind the ventilation flap.

On other types of VELUX windows, you will find the data plate somewhere visible on the inside of the frame or sash, or behind the