| Venetian Blinds |
Measuring
The width and drop for each blind must be clearly specified, to the nearest 0.1cm
Please be aware of the following when measuring:
| max width | max drop | max area | min width | min drop | |
|---|---|---|---|---|---|
| 15mm | 270cm | 300cm | 6m2 | 25cm | 20cm |
| 25mm | 400cm | 400cm | 12m2 | 25cm | 20cm |
The order also needs to specify which measurement has been taken:
Exact
This measurement is the exact area you would like the blind to cover
Recess
This measurement should be calculated by measuring the recess width from wall
to wall in 3 places and the drop from the top of the recess to the window
sill in three places
Operation
Each blind can be tilted, raised and lowered by separate controls.
Tilting of 15mm, 25mm and 35mm blinds is by wand and 50mm is by a cord loop. Please specify whether this control is required on the left or right. To raise and lower the blind cords are used. Please specify whether the cords are needed on the left, right or separate sides
Additional Information
15mm and 25mm blinds are supplied with co-ordinating ladder, cord, headrails
and bottom rails.
15mm & 25mm blinds are supplied with a headrail that is 27mm wide x 19mm
height.
All blinds are supplied with standard swivel brackets or universal extension
brackets.
| Wooden Venetian Blinds |
Measuring
The width and drop for each blind must be clearly specified, to the nearest 0.1cm
Please be aware of the following when measuring:
| max width | max drop | min width | min drop | |
|---|---|---|---|---|
| 25mm | 200cm | 300cm | 32cm | 20cm |
| 35mm | 200cm | 300cm | 32cm | 20cm |
| 50mm | 300cm | 245cm | 40cm | 20cm |
The order also needs to specify which measurement has been taken:
Exact
This measurement is the exact area you would like the blind to cover
Recess
This measurement should be calculated by measuring the recess width from wall
to wall in 3 places and the drop from the top of the recess to the window
sill in three places
Stacking
Due to the thickness of the wood slat it is important that you are aware of the stack size for the blinds. The following details are for guidance only and should be increased by 10% for blinds supplied with tape.
| Approximate stack size | |||
|---|---|---|---|
| Drop of Blind | 25mm blind | 35 mm blind | 50 mm blind |
| 50cm |
12cm |
11cm |
11cm |
| 100cm | 17.5cm |
16cm |
15.5cm |
| 150cm | 23cm |
20cm |
20cm |
| 200cm | 28cm |
25cm |
24.5cm |
| 250cm | 33cm |
29.5cm |
29cm |
| 300cm | 38cm |
34cm |
33.5cm |
Slat Width
Choose from a slat width of either 25mm, 35mm or 50mm (See individual slats for availability)
Operation
Each blind can be tilted, raised and lowered by separate controls.
Cords are used to raise and lower the blind. Please specify whether the cords are needed on the left or right, or on separate sides.
All control cords and wooden acorns are colour co-ordinated with the wood slats.
If split controls are required the tilt cords must be on the left with the cord lock on the right
Options
Blinds can be ordered with either a ladder or tape. 25mm blinds have a tape width of 13mm. 35mm blinds have a tape width of 19mm. 50mm blinds have a tape width of 21mm. The colour reference chosen should be stated on your order.
Fittings
A valance to match the wood slats is also included. Blinds measured recess will be supplied with a straight valance, blinds measured exact will be supplied with a valance that covers the end of the rail.
Additional Information
25mm and 35mm blinds are supplied with a headrail that is 40mm wide x 40mm height.
50mm blinds are supplied with a white headrail that is 51mm wide x 40mm height.
Mixed colour Wood Blinds are not available.
All blinds supplied with end fix brackets. Larger blinds will be supplied
with U shaped centre support brackets which can either be face fixed or top
fixed.
Please note Blinds over 200cm wide are only available on 50mm Slat
| Vertical Blinds |
Measuring
The width and drop for each blind must be clearly specified, to the nearest 0.1cm
Please be aware of the following when measuring:
| max width | max drop | min width | min drop | |
|---|---|---|---|---|
| 89mm / 127mm | 500cm |
400cm |
25cm |
50cm |
The order also needs to specify which measurement has been taken:
Exact
This measurement is the exact area you would like the blind to cover
Recess
This measurement should be calculated by measuring the recess width from wall
to wall in 3 places and the drop from the top of the recess to the window
sill in three places
Operation
Vertical blinds are controlled using cord to draw the louvres & beaded chain to rotate the louvres, please specify whether you require these on the left or right.
The blind can be made to either draw to the left, right or the bunch of louvres can be split to both sides
Headrails
Headrails are available in white.
All visible components are colour matched to the headrail
Standard headrail: 30mm wide x 27mm deep
Fittings
A valance to match the wood slats is also included. Blinds measured recess will be supplied with a straight valance, blinds measured exact will be supplied with a valance that covers the end of the rail.
Additional Information
Blinds are supplied with either face fix,top fix or universal extension brackets that co-ordinate with the headrail.
Please note top fix brackets are supplied with Recess size blinds and face fix brackets for Exact size blinds.
Please contact us should you require top fix for Exact size and Face Fix for Recess size measurements.
| Roman Blinds |
Measuring
The width and drop for each blind must be clearly specified, to the nearest 0.1cm
Please be aware of the following when measuring:
| max width | max drop | min width | min drop | |
|---|---|---|---|---|
| Without Join | 130cm |
250cm |
35cm |
40cm |
| With Join | 250cm |
200cm |
35cm |
40cm |
These restrictions are imposed as a limit to the effective operation of the blind.
The order form also needs to specify which measurement has been taken:
Exact
This measurement is the exact area you would like the blind to cover
Recess
This measurement should be calculated by measuring the recess width from wall
to wall in 3 places and the drop from the top of the recess to the window
sill in three places
Operation
Standard blinds are raised and lowered using a cord that can be tied around
a cleat.
Deluxe blinds operate via a sidewinder mechanism.
Please specify whether the cord is required on the left or
right
Either face fix, top fix or universal extension
brackets are available.
Additional Information
All Roman blinds are fully lined (Blackout lining is available on request).
All of the Roman blinds have a With Care Instruction label.
Standard headrail 26mm wide x 25mm deep. Deluxe headrail 40mm wide x 40mm
deep.
Selected Roman blinds can be dry cleaned. Please ensure all fibre rods and
cords are removed beforehand.
| Roller Blinds |
Measuring
The width and drop for each blind must be clearly specified, to the nearest 0.1cm
The order form also needs to specify which measurement has been taken:
Exact
This measurement is the exact area you would like the blind to cover
Recess
This measurement should be calculated by measuring the recess width from wall
to wall in 3 places and the drop from the top of the recess to the window
sill in three places
Braid
If ordering braid the trim design & suitable colour match will be used.
Operation
Blinds are either available with a sidewinder or spring mechanism. If ordering a sidewinder please specify whether you would like the control on the left or right.
Spring mechanisms are available on blinds up to 2m wide and are made with a 25mm barrel
Sidewinder barrels are available in 3 sizes:
Blinds up to 2m wide are made with a 25mm barrel
Blinds from 2m to 2.4m are made with a 36mm barrel
Blinds over 2.4m are made with a 42mm barrel
| min width | min drop | |
|---|---|---|
| Spring |
34cm |
20cm |
| Sidewinder |
15cm |
20cm |
Additional Information
Brackets are available in white
Whenever possible we will avoid joining a fabric
Blackout fabric cannot be joined
Important note for measuring Roller blinds!
For Roller blinds, we have to allow for fittings at either end of the blind,
as there is no headrail. This means the actual fabric will be approximately
2.8cm - 3.3cm less than the overall blind width specified.
Example 1
If an ‘Exact’ width of 120cm is specified
then the make up of the roller blind will be as follows:
Cloth Size = 117.2cm, Brackets = 2.8cm, Blind Width = 120cm
Example 2
If a ‘Recess’ width of 120cm is specified then
the make up of the roller blind will be as follows after the 10mm allowance
has been deducted;
Cloth Size = 116.2cm, Brackets = 2.8cm, Blind Width = 119cm
| Woodweave |
Information
| min width | min drop | |
|---|---|---|
| Min Width |
35cm |
13.78" |
| Max Width | 200cm | 78.7" |
| Min Drop | 60cm | 23.6" |
| Max Drop | 200cm |
78.7" |
Features / Benefits
- Fully customised blinds, made to your exact requirements
- 10 designs available
- Roman style operation with cordlock
- Matching Valance- 12cm in depth
- Wooden Headrail
