Wooden blinds | Splendor Wooden Blinds | Alderbrook

Product specification

Minimum width	40.0cm	Minimum drop	20.0cm
Maximum width	242.0cm	Maximum drop	300.0cm
Composition	Basswood
Finish	Made to Measure Wood Venetian Blind
Description
A white coloured wood for a fresh clean look. Available in 25mm, 35mm and 50mm slat size.
Other blinds in this range

Technical Info

Splendor Wooden Blinds

IMPORTANT INFORMATION - Allowances & Deductions

The allowances and deductions we make for made to measure wooden blinds from the Splendor collection;

 'Recess' specified blinds        'Exact' size specified blinds          

Tolerance levels

Please note that due to the nature and manufacture of these wooden slats we work to a tolerance of one extra slat on the length and within 4mm on the width

For more details please email us at enquiries@blinds4uk.co.uk or call us on 08704 460 550.

Slat Widths

Choose from a slat width of either 25mm, 35mm or 50mm (See individual colours for availability)

Operation . 

• Each blind can be tilted, raised and lowered by separate controls

• Cords are used to raise and lower the blind. Please specify whether the cords are needed on the left or right, or on separate sides.

• All control cords and wooden acorns are colour co-ordinated with the wood slats.

• If split controls are required the tilt cords must be on the left with the cord

lock on the right

Options

Blinds can be ordered with either a ladder cord or tape.

• 25mm & 35mm blinds are supplied with a ladder tape width of 18mm.

• 50mm blinds are supplied with a tape width of 25mm.

Valance

A valance colour co-ordinated to the wood slats is also included. Blinds measured recess will be supplied with a straight valance, blinds measured exact will be supplied with a valance that covers the end of the rail.

Additional Information

• 25mm and 35mm blinds are supplied with a headrail that is 40mm wide x 40mm height.

• 50mm blinds are supplied with a headrail that is 51mm wide x 40mm height..

• All blinds supplied with end fix brackets. Larger blinds will be supplied with U shaped centre support brackets which can either be face fixed or top fixed.

Please note Blinds over 200cm wide are only available on 35mm & 50mm Slats.

Stacking

Due to the thickness of the wood slat it is important that you are aware of the stack size for the blinds. The following details are for guidance only and should be increased by 10% for blinds supplied with tape.